Free Access
| Issue |
Microsc. Microanal. Microstruct.
Volume 7, Number 5-6, October / December 1996
|
|
|---|---|---|
| Page(s) | 433 - 439 | |
| DOI | https://doi.org/10.1051/mmm:1996142 | |
References of Microsc. Microanal. Microstruct. 7 433-439
- Guild F.J. and Summerscales J., Microstructural image analysis applied to fibre composite materials: a review, Composites 24 (1993) 383-393. [CrossRef]
- Avérous L., Étude par analyse d'images de la microtexture d'un polypropylène chargé fibres de verre broyées - Relation avec les propriétés du matériau, Thèse de Doctorat de l'École des Mines de Paris (1995).
- Lunt J.M. and Shortall J.B., The effect of extrusion compounding on fibre degradation and strength properties in short glass-fibre-reinforced nylon 6.6, Plas. Rubber: Process. Sept. (1979) 108-114.
- Sawyer L.C., Determination of Fiberglass lengths: Sample Preparation and Automatic Image Analysis, Polym. Eng. Sci. 19 (1979) 377-382. [CrossRef]
- Carling M.J. and Williams J.G., Fiber length distribution effects on the fracture of short-fiber composites, Polym. Compos. 11 (1990) 307-313. [CrossRef]
- Ulrych F., Sova M., Vokrouhlecky J. and Turcic B., Empirical relations of the mechanical properties of polyamide 6 reinforced with short glass fibers, Polym. Compos. 14 (1993) 229-237. [CrossRef]
- Talbot H., Analyse morphologique de fibres minérales d'isolation, Thèse de Doctorat de l'École Nationale Supérieure des Mines de Paris (1993).
- Avérous L., Quantin J.C., Lafon D. and Crespy A., Granulometric characterization of short fiberglass in reinforced polypropylene. Relation to processing conditions and mechanical properties, Int. J. Polymer Analysis Characterization 1 (1996) 339-347.
- Fischer G. and Eyerer P., Measuring Spatial Orientation of Short Fiber Reinforced Thermoplastics by Image Analysis, Polym. Compos. 9 (1988) 297-304. [CrossRef]
- Toll S. and Andersson P. O., Microstructural characterization of injection moulded composites using image analysis, Composites 22 (1991) 298-306.
- Clarke A.R., Davidson N. and Archenhold G., Measurements of fibre direction in reinforced polymer composites, J. Microsc. 171 (1993) 69-79.
- Avérous L., Quantin J.C., Lafon D. and Crespy A. Determination of 3D orientations in reinforced thermoplastics, using scanning electron microscopy, Acta Stereol. 14/1 (1995) 69-74.
- Avérous L., Quantin J.C., Lafon D. and Crespy A., Evolution of the three-dimensional orientation of glass fibers in injected isotactic polypropylene, Polym. Eng. Sci. (To be published).
- Waterbury M.C. and Drzal L.T., Determination of fiber volume fractions by optical numeric volume-fraction analysis, J. Reinf. Plast. Comp. 8 (1989) 627-636. [CrossRef]
- Ess J.W., Hornsby P.R., Lin S.Y. and Bevis M.J., Characterisation of dispersion in mineral filled thermoplastics compounds, Plast. Rub. Process. Applic. 4 (1984) 7-14.
- Coster M. and Chermant J.L., Précis d'analyse d'images (Les Presses du CNRS, 1989).
- Serra J., Image Analysis and Mathematical Morphology Vol. 1 (Academic Press, 1982).
- Stoyan D., Kendall W.S. and Mecke J., Stochastic Geometry and its Applications (J. Wiley and Sons Ltd, 1987).
- Sawyer L.C. and Grubb D.T., Polymer Microscopy (Chapman and Hall, 1987).
- Bailey R. and Rzepka B., Fibre orientation mechanisms for injection molding of long fibre composites, Int. Polym. Process. 1 (1991) 35-41.
- Underwood E.E., Quantitative Stereology (Addison-Wesley Publishing Company, London, 1970).
- Jeulin D., Analyse morphologique de la répartition spatiale, Note Interne N° N-28/88/MM, École des Mines de Paris (1988).
- Saxl I., Pelikan K., Rataj J. and Besterci M., Quantification and modelling of heterogeneous systems (Cambrige International Science Publishing, 1995).
- Wendrock H. and Hübel R., Characterization of microstructural anisotropy of steels by means of mathematical morphology, Acta Stereol. 13/1 (1994) 143-148.
- Pelikan K., Saxl I. and Ponizil P., Germ-grain model of short-fibre composites, STERMAT 94, Pologne (1994) pp. 389-396.